[Automatic Workshop Material Dispensing Dust PurifierProduct Introduction]

Name: Laser Dust Removal Equipment

Model: SNJ1100E/SNJ1500E/SNJ2200E

Brand: Jienengrui

 【Automatic Workshop Material Dispensing Dust Purifier scope of application 】

Five-axis machining centers, welding robot workstations with dust control systems, large-scale welding workshop dust purification, and dust removal for large laser cutting machines and plasma cutting machines can be installed in outdoor areas to collect and treat floating and suspended dust and smoke in explosion-proof environments.

[Automatic Workshop Material Dispensing Dust PurifierProduct Features]

1.The explosion-proof motor and cabinet are modularized, with high airflow, low noise and stable performance.

2. The Siemens frequency converter can automatically adjust the power of the motor, realize the speed change of the motor, keep the constant air volume and air pressure, and achieve the purpose of saving electricity and prolonging the service life of the filter. It can control the starting current of the motor, reduce the starting current sufficiently, and reduce the maintenance cost of the motor.

39, 12, or 15 PTFE conductive-coated filters to expand the filtration area.

4.The programmable pulse controller manages the pulse cleaning method and allows setting the automatic pulse cleaning interval for the filter.

5.Standard remote/local switch function, allowing selection between local operation and device-linked operation based on operational conditions.

6.Configure a differential pressure gauge to measure the pressure during machine operation. When the negative pressure exceeds the set value, it will alert you to replace the filter.

7. The standard dual pneumatic butterfly valve lock enables rapid bagging without requiring secondary manual cleaning.

8.The installation method of the air supply hose can avoid the wind loss caused by the narrow area.

9.The machine's internal filtration system features a speed reduction design, which creates a dust settling effect inside the machine after dust is drawn in.

10.The system uses Schneider Electric, which is safe and stable, and has phase sequence, overheat and overload protection.

11. The machine body is made of 2.0mm thick sheet metal and has been baked at high temperature to prevent paint peeling and rust.

12.The device can work online with laser cutting machine