Application case of 10HP Industrial fume extractor supporting welding manipulator for cleaning welding fumes
DJS Series Industrial Dust Collector
with PTFE-Membrane Flame Retardant HEPA Cartridge Filters
This is the Industrial fume extractor we use in the robot welding workshop, a 10HP single-machine dust purification and dust removal equipment with sliding air duct and a dust hood with a vertical curtain, which can move synchronously with the welding robot。
Product Introduction
Category: Industrial Dust Collector
Model: DJS550 | DJS750
Brand: 洁能瑞
Installation: Indoor, Outdoor
Suitable for combustible dust: No (customizable)
Function: Used as an online system for collecting high volume process-generated dust or impurities from the source point on a continuous basis to enhance the air quality.
Application: Dust, Fumes
Welding robot workstation dust control, large laser cutting machine, plasma laser cutting machine dust removal, etc.
Product Features
Description | Unit | DJS550 | DJS750 |
Current type | Ph - V - Hz | 3 - 380 - 50/60 | |
Power | kW / HP | 5.5 / 7.4 | 7.5 / 10 |
Airflow | m³/h / CFM | 4000-5700 / 2354-3355 | 5000-7000 / 2943-4120 |
Vacuum | kPa / inH2O | 2.1-2.9 / 8.4-11.6 | 2.5-3.3 / 10-13.3 |
Sound pressure level | dB(A) | 72 | 74 |
Container capacity | l / gal | 50 / 13.2 | |
Filter area | m2 / ft2 | 72 / 775 | |
Filter efficiency | μm | 0.1-0.3 | |
Filter type |
| 15 HEPA filters | |
Filter cleaning system |
| Automatic Pulse Jet (Compressed air requirement: 4-6 bar) | |
Explosion-proof configuration |
| No (customizable if required) | |
Switch control mode |
| Local + Remote | |
Inlet diameter | mm / in | 150|500 / 5.9|19.7 | |
Cable length | m / ft | 8 / 26.2 | |
Dimensions (L × W × H) | mm / in | 1280*1200*2600 |
1. The whole machine has passed the third party "Electrical Safety Performance Test" with Report No. URS180022894.
2. Centrifugal fan and modular compact design featuring large air volume, low noise level and stable performance.
3. The Schneider electric appliance ensures safety and stability with functions of phase sequence, overheat and overload protection.
4. 15 PTFE-membrane flame retardant HEPA cartridge filters with great filter surface and excellent filter efficiency.
5. The programmable pulse controller can be used to control the automatic pulse jet frequency and time interval according to actual application requirements.
6. The deflector/wear plate design for air inlet section facilitates dust settlement by reducing air velocity and re-direct the dust to avoid it from direct contact to the filters.
7. Local/remote switch is provided as standard. Customer can make use of the remote linkage function to start and stop the dust collector together with their own machine.
8. The oil-water separator can filter the impurities in the compressed air and protect the normal operation of the pulse system.
9. The differential pressure gauge is used to monitor the pressure inside the machine when it is operating and can be used as a reminder when to replace the filters.
10. Two pull-out dustbins, convenient for dumping garbage.
11. The machine is built with 2.0mm thick sheet metal which goes through high temperature pre-painting, antirust and anti-corrosion process.
12. The machine has great sealing performance with double-layer anti-leakage design.
Leave us a message
The first thing we do is meeting with our clients and talk through their goals on a future project. During this meeting, feel free to communicate your ideas and ask lots of questions.